DIY Car Wallet Tutorial

I am a little Pinterest obsessed, like many I am sure.  There are lots of great ideas that inspire others to create even better ideas and this is what makes it so exciting for me.  I love finding an idea and then building on it, changing it, to make it my own.  I am in awe of the people (mostly women) who somehow find the time to not only make something but also take pictures while they are doing it and post tutorials on blogs or websites. Judging by my Pins Complete board I have benefited from quite a few great ideas so I decided that it was only fair that I post a tutorial myself in the hopes that others out there will be inspired by my little creation and then make it their own.  My inspiration for this car wallet came from these pins and blogs: http://pinterest.com/pin/195343702556818254/ 

 http://homemadebyjill.blogspot.ca/2009/12/cozy-car-caddy-tutorial.html 

 http://crazylittleprojects.com/2012/12/kids-car-carrier-tutorial.html.  All very cute but I wanted to add a track as part of the wallet so I took a bit from all of these and came up with this.

Here is what you need:  Cotton fabric - one piece 15 1/2" x 9", one piece 4 1/2 x 9 and one piece 6" x 12 1/2".  One piece of green felt 11 1/2 x 9 and one piece of black felt 11 1/2 x 9.  

One piece of interface 4 1/2 x 9 and small piece of velcro.

All seam allowances were 1/4" serged seams so add more to your pieces if you want to use 5/8" seams.

1. Take the 6" x 12 1/2" piece and fold right sides together so you have a 3" x 12 1/2" piece. Sew 1/4" seam on two sides and leave an end open. Turn, Press, and turn in the open end.  You could topstitch this piece - I didn't.

2. Take the green felt piece and the 4 1/2" piece and join these right sides together with a 1/4"seam.  Iron on interfacing just below seam line.

3.Cut out a track from the black felt piece.  I folded mine into quarters, cut the curve, then made an oval from paper using the same " folding into quarters" technique and cut out the middle of the track.  Place over green felt.  Applique curves, bottom edge and center.  Applique white lines. 

4. Figure out where you want the velcro pieces - I wanted this wallet to wrap tightly so it folds three times. I put the smooth piece 1/2 below the top of the wallet on the black felt track.  The rough velcro piece went onto the right side of the 15 1/2 x 9 piece of cotton 5 1/2 " up from the bottom.  It probably could have been down a bit more - maybe at 5".  Sew around the velcro a couple of times.

5. Put right sides together and sew around the entire wallet with a 1/4" seam leaving an opening along the bottom of the wallet.  Turn right side out, poke out corners, press with hands.  Then topstitch very close to the edge all the way around catching in the opening at the bottom.  

6. Add the pockets:  Use the 3" strip.  Attach the strip along the sides of the wallet, just in from the topstitching.  Using 4 cars, pin the fabric evenly in three spots between each car.  Sew that line of stitching  at those three spots.  Then form some pleats along the bottom and pin and sew the pocket to the bottom of the wallet  (See http://crazylittleprojects.com/2012/12/kids-car-carrier-tutorial.html for pics).

7. Wrap up and go!  In hindsight I maybe would have just added two ribbons at the top or webbing with velcro on the ends that could be wrapped and tied.  The rough side of the velcro is sticking to the felt if it is pulled tighter.  So it is up to the next person to make this better!  Enjoy!

DIY EXTREME - THE PENNY WALL

 When we built our home 7 years ago it was always with the intention of tiling behind our wood stove but tile is pricey and we just never got around to doing it. Then Pinterest arrived in my life (Yeah!Pinterest) and I saw a floor done with penny tile last summer and I knew that I had to have a penny wall. We used their technique to do our wall.  You can see their post at: (http://big-design.blogspot.ca/2011/01/penny-saved-is-tile-floor.html ).  Canada had announced their intent to phase out the penny so it was perfect timing to make a monument to the penny.  Let me say that this is not a weekend DIY or one for the faint of heart at least not on the scale we did it, but it is one of the cheapest ways to tile a wall – it costs pennies!  There was a major investment of time and in our case, muscle power (more of that later).   We started collecting pennies last summer by inviting our friends and family to bring their pennies to us for cash but instead they all donated almost 9,000 pennies to the wall! Thank you to all of you! We bought another 10,000 and we had a few thousand of our own.  We decided on not doing the entire wall but instead, doing a 6’wide strip behind the stove and taking it up 16’ to the roof line – yep I said 16’. We found a tile place where we could buy a roll of 1’wide fibreglass mesh and then we had to decide on glue.  Glues to attach metal were expensive and reviews suggested the smell lingered forever so we opted for using silicone – the kind you use in your bathroom or kitchen - to attach the pennies to the mesh.  I tried to research if silicone would stick with the tile thin -set and could not find anything concrete so we went ahead hopeful that it would all work out.

 In October I went on the computer and found http://incompetech.com/graphpaper/circle/ to print circles the size of pennies on paper.   I used 2cm (the size of pennies) for the grid size and a radius of .9 to give the spacing for the grout.   I printed quite a few sheets and cut and joined sheets together to make 4 one square foot templates (so we could make 4 tiles at a time).  We put the templates on a table with a sheet of plexi-glass from an old picture frame over them. Then we put down a piece of plastic wrap to keep the silicone off the plexi-glass and to keep the tiles from sticking together as we piled them up. Finally, the square foot of mesh was put down and we lined up corners and started attaching pennies. Jerry did all of the tiles starting in October, doing one or two a night and having about 9’ of tile ready by the end of December. He wore a spot in the floor he spent so much time doing those tiles!  Each tile took 224 pennies and we chose to do things completely random, heads, tails, US, Canadian, old, new, even damaged and painted. Our oldest penny that we could see a date on is from 1920.

New Years Eve Day we attached 9’of tile – we had been waiting for a day that would be sunny enough not to have the wood stove on (our main source of heat).  The actual tiling was pretty easy.  Only a very thin coat of thin set was possible as the pennies are so thin and we needed to leave room for grouting.  Each foot of tile required us to attach pennies one at a time to fill in the “half-row” at the top of the tile.

The silicone did not seem to present a problem and only a few pennies fell off the mesh while we were attaching them to the wall.  It was pretty easy to re-attach any with a bit of thin-set on the penny and then stick it to the wall.  Next morning they were all still there on the wall.  We were thrilled it had worked.  Jerry went back to making tiles and we had the next 7’ ready to go a few weeks later.  Our roof line is sloped behind the stove so the last tiles had to be made up as we tiled once we could measure and cut the mesh on the angle to fit.  The wall took approx 19,500 pennies - we spent only $100 on pennies, $75 on the mesh, and about $70 on the grout and thin-set - we used the standard stuff from Home Depot. Add the costs of trim, plastic wrap and silicone and we spent approximately $300 to tile a 16'x 6' area.

We painted and attached a thin trim down each side and across the top and we were ready to grout.  We knew that the grouting would be challenging, grouting regular tile is hard work and pennies are not smooth.  It was apparent very quickly that Jerry was not able to pull a lot of the grout back off the pennies because it caught in the minuscule edges of the pennies.  I tried taking the grout off with sponges and lots of water as you would normally do but then I was losing the grout in between and there was not much of that because the pennies are pretty thin.  It would have taken huge amounts of water that we could not put down the septic system and it all seemed terribly wasteful.  So we made the decision to let it all dry for a day which meant that we then had to remove the dry grout from more than 50% of the pennies with damp cloths and screwdrivers, paint scrapers one penny at a time and most of the work while we were on ladders 16' up! 

The first day we cleared a couple of square feet and I was pretty discouraged.  I avoided looking at the rest of the wall.  But a new day dawns and you find your groove with cleaning, some areas were easier than others, we had the tunes blasting and there were two of us working on it.  After about 40 hours of scraping the wall over two weeks it was finally done. All told we figure it took about 100 hours of work for the whole job.  

It was soooo worth all the work!  I love the glow of the coppery colour, the variation of the tones in the wall. I love the way the light makes it sparkle in some areas.  The pics do not do it justice - really it looks so much better than these pics!

Thanks again to all our friends and family - can't wait for you all to come and see your pennies!